Dioctyl dimethyl ammonium chloride ( Dimethyl dioctyl ammonium chloride )

The Quat with unusual and exiting performance characteristics.

Lowest tendency to foam.

Broad spectrum of biocidal activity against both gram positive and gram negative organisms.

Algaestatic and algaecidal performance at economical use concentrations.

Toxicological and ecological documentation.

Dioctyl dimethyl ammonium chloride is composed of twin chain dimethyl ammonium chloride.

The dioctyl dimethyl structure provides a controlled foam biocide, exhibiting low, fast breaking foam with exceptional dynamic controlled foam performance. 

When used as an active ingredient in FIFRA1 registered formulations such as hard surface disinfectants, sanitizers and/or certain types of water treatment formulations, these products have been found to provide superior biotical action against a broad spectrum of microbial organisms such as: bacteria, fungi, viruses, and algae. 

This “third” generation quaternary ammonium compound delivers potent germicidal action in hard water and organic soil loads.

1. Active matter

N,N-Dioctyl-N,N-dimethylammoniumchloride

Active Substance: dioctyldimethyl ammonium chloride

Structural formula

R CH3 Cl -N+R CH3 R = C8 H17

1.1 CAS No.: 5538-94-3

1.2 EINECS No.: 226-901-0

1.3 UN No.: 2920

2. Specifications

2.1 Appearance at 20°C clear liquid

2.2 Colour, Apha 100 max.

2.3 pH 1% aqueous solution 6.5 – 8.0

2.4 Assay (Titration, MW 312) 50.0 – 52.0 %

2.5 free Amine + Amine HCl 1.0 % max.

2.6 Ash 0.8 % max.

2.7 Water, KF 36.0 – 40.0 %

2.8 Ethanol 8.0 % min.

3. Properties

3.1 Odour aromatic

3.2 Density 0.9320 g/cm3

3.3 Viscosity (Brookfield, sp.1, 5 rpm, 20°C) 22 mPa⋅s

3.4 Average Molecular weight 312

3.5 Flash Point (Abel Pensky cc) 50°C

3.6 Surface tension (1% aqueous solution) 32 mN/m

3.7 Ionogenicity cationic

3.8 Freeze thaw stability good

3.9 Solubility soluble in water

3.10 Compatibility not compatible with anionics

3.11 Setting point < 5°C 3.12 pH 10% aqueous solution 6.5 - 9.0 4. Registrations 4.1. Europe European Inventory of Existing Chemical Substances (EINECS) 4.1.1 Switzerland BAG T No. 37 774 / Toxicity class : 3 4.1.2 France Specified in positive list for use in food industry. 4.2 U S A Toxic Substances Control Act (TSCA) Inventory FDA 21 CFR 178.1010 approval 4.3 Japan Japanese Handbook of Chemical Substances (Miti) 4.4 Australia Australian Inventory of Chemical Substances (AICS) 5. Antimicrobial efficacy 5.1 BACTERIA The bactericidal efficacy has been tested and shown according to the following test procedures: DGHM (Germany) -- AOAC (USA) 5.2 ALGAE The algaecidal concentration of BARDAC-LF was shown to be 1- 5 ppm. 6. Other investigations Information available upon request 7. Use areas Disinfectant and disinfectant cleaner. Agriculture applications, food and dairy industry. Water treatment (swimming pools, cooling towers, etc). Slimicide (paper industry). 8. Recommendations to formulate Incompatible with anionic detergents. Synergistic effects in combination with aldehydes and complexing agents (e.g. EDTA). 9. Analytical procedures Titration (ISO 2871-2) 10. Storage Product is supplied as follows: Type: iron drum polyethylene drum IBC-container bulk weight net: 30 kgs 190 kgs 850 kgs It can be stored in the sealed original packaging over a period of two years. 11. Regulatory information refer to MSDS 12. Toxicological information refer to MSDS 13. Ecological and ecotoxicological information refer to MSDS The information contained herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge. However, no warranty is made, either expressed or implied, regarding its accuracy or the results to be obtained from the use of such information. No statement is intended or should be construed as a recommendation to infringe any existing patent. 5538-94-3 Dimethyldioctylammonium chloride N,N-Dimethyl-N-octyloctan-1-aminium chloride Bisoctyl dimethyl ammonium chloride Dioctyldimonium chloride Dioctyldimethylammonium chloride Querton 28CL Dioctyl dimethyl ammonium chloride 1-Octanaminium, N,N-dimethyl-N-octyl-, chloride Dodigen 2617 Caswell No. 392H UNII-0X0RL40Y6H Dimethyl dioctyl ammonium chloride HOE-S 2617 EINECS 226-901-0 EPA Pesticide Chemical Code 069166 RC 5626 0X0RL40Y6H 1-Octanaminium, N,N-dimethyl-N-octyl-, chloride (1:1) dimethyl(dioctyl)azanium;chloride N,N-Dimethyl-N-octyl-1-octanaminium chloride CAS-5538-94-3 NCGC00182056-02 NCGC00182056-03 Ammonium, dimethyldioctyl-, chloride C18H40ClN SCHEMBL33353 KSC494A8P dioctyldimethyl ammonium chloride Disoctyl Dimethyl Ammonium Chloride Ammonium, dimethyldioctyl-, chloride (8CI) Dimethyldioctylammonium chloride  Bisoctyl dimethyl ammonium chloride 5538-94-3 Dimethyldioctylammonium chloride DIOCTYL DIMETHYL AMMONIUM CHLORIDE Bisoctyl dimethyl ammonium chloride Disoctyl Dimethyl Ammonium Chloride 1-Octanaminium, N,N-dimethyl-N-octyl-, chloride N,N-Dimethyl-N,N-dioctylammonium chloride Dioctyl Dimethyl Ammonium Chloride--DODAC Bardac LF N,N-Dimethyl-N,N-dioctylammoniumchlorid (in 10% Ethanol/40% Water) N,N-Dioctyl-N,N-dimethylammonium chloride Bardac LF-70 N,N-Dimethyl-N,N-dioctylammoniumchlorid (in 10% Isopropanol/20% Water) Bardac LF-80 N,N-dimethyl-N-octyl-1-octanaminium chloride Octanaminium, N,N-dimethyl-N-octyl-, chloride Dimethyldioctylaminium·chloride Dioctyldimethylaminium·chloride N,N-Dimethyl-N-octyl-1-octaneaminium·chloride [EINECS(EC#)]: 226-901-0 [Molecular Formula]: C18H40ClN [MDL Number]: MFCD01711139 [Molecular Weight]: 305.97 [MOL File]: 5538-94-3.mol [Appearance]: Liquid [Usage] : Bardac LF is a quaternary ammonium based antimicrobial used as a bacteriostat, disinfectant and/or a microbiocide. Bardac LF is ideal for recirculating water systems where control of undesirable microbes without excessive foam is essential. CAS No.5538-94-3 Chemical Name:Bisoctyl dimethyl ammonium chloride Synonyms: D821;Bardac LF;Bardac LF 70;Bardac LF 80;Trospium Impurity 4 Chloride;Dimethyldioctylaminium chloride;Dioctyldimethylammonium chloride; Dimethyldioctylammonium Chloride;Dimethyldioctylammonium chloride;dimethyl(dioctyl)azanium chloride Bisoctyl dimethyl ammonium chloride Chemical Properties,Uses,Production Chemical Properties Liquid Uses Bardac LF is a quaternary ammonium based antimicrobial used as a bacteriostat, disinfectant and/or a microbiocide.  Safety Profile A poison by ingestion. When heated to decomposition it emits toxic vapors of NOx and Cl-. Bisoctyl dimethyl ammonium chloride Preparation Products And Raw materials